Solar-Powered Clock Controller
Solar-Powered Controller (GNSS)
- QP-400GS


The GNSS receiver automatically receives GNSS signals from GNSS satellites to synchronize the time of the clock.
The energy generated by the solar panel is stored in the capacitor inside the clock controller, powering the clock unit during the nighttime.
Time accuracy
Monthly rate of less than ±3 seconds (0℃~+40℃)
*Without receiving GNSS signals
Secondary clock output
Number of circuits : 2 ch
Signal form :
30-sec polarized signal: DC 3.6 V, pulse width of 250 ms
Output capacity : DC 3.6 V, 60 mA/channel
GNSS receiver
Correction frequency : Once a day at 12:00 PM
Correction accuracy : Less than ±5 ms
Time difference :
Settable with button operation: UTC ±12 hours
(at one hour intervals)
Solar panel
Installation condition :
At a place where solar panel is exposed to the sunlight for at least four hours a day (10:00 AM ~ 2:00 PM)
Rechargeable battery
Capacitor DC 3.6 V
* It stores energy generated by solar panel.
Backup battery
Lithium battery DC 3.6 V, 19 Ah
*
When the power reserve in the capacitor is reduced significantly, it powers the clock controller instead of the capacitor.
Hand adjustment
Automatic hand adjustment preset with operation buttons
Daylight saving time
Settable with button operation on the day before starting or ending day
Digital pace measurement
A function to upgrade the time accuracy by manually performing accurate “0” second setting repeatedly.
Operational temperature range
-20℃~+60℃
Operational humidity range
90% or less (at +40℃)
Outer dimensions
W110 × H211 x D77 mm
Weight
Approx. 530 g